DeWalt DCC018N-XJ 18V XR Cordless Tyre Inflator – Body Only
The DeWalt DCC018N-XJ is a compact 18V XR cordless tyre inflator that reaches 11 bar (160 PSI) and inflates a 235/70R17 car tyre in about 400 seconds. A digital gauge with automatic shut-off lets you preset an exact pressure in BAR, kPa or PSI and prevents over-inflation, while the LED light makes roadside work possible at night. It handles both high-pressure items such as car, van and bike tyres and high-volume items such as air beds and paddling pools, which it can also deflate.
Supplied as body only, so an 18V XR battery and charger are sold separately. It comes with a 12V car adapter, high-pressure adapter, Presta bicycle adapter and ball needle stored on board.
Performance
Maximum pressure is 11 bar (160 PSI). Inflation rate is 0.35 l/min at 6.2 bar and around 0.6 l/min at 2 bar, and a 235/70R17 tyre takes roughly 400 seconds from flat. The 75 cm high-pressure hose reaches all four valves without moving the unit around the vehicle.
Accuracy and safety
Set your target pressure on the digital gauge and the inflator stops automatically when it gets there, so tyres are never over-inflated. Readings switch between BAR, kPa and PSI to match whatever your vehicle's door placard or manual uses.
Three power options
Run it from any DeWalt 18V XR battery, from your vehicle's 12V socket using the included car adapter, or from the mains with the 240V AC adapter, available separately as spare part N557515.
Key features
- Compact, lightweight inflator and deflator with LED light for use at night or in low light
- High-pressure hose inflates a 235/70R17 tyre in approximately 400 seconds
- Maximum output of 11 bar (160 PSI), ideal for car, van, motorcycle and bicycle tyres
- High-volume hose with adapter for fast inflation and deflation of air beds and inflatables
- Digital gauge with preset pressure and automatic shut-off to prevent over-inflation
- Multiple units of measure: BAR, kPa and PSI
- On-board storage for the high-pressure adapter, Presta bicycle adapter and ball needle
- 12V car power adapter included; 240V AC adapter available separately (SKU N557515)
Specification
| Part number | DCC018N-XJ |
|---|---|
| Battery voltage | 18V XR (body only, battery sold separately) |
| Max. pressure | 11 bar / 160 PSI |
| Inflation rate @ 6.2 bar | 0.35 l/min |
| Inflation rate @ 2 bar | 0.6 l/min |
| Hose length | 75 cm |
| Units of measure | BAR, kPa, PSI |
| Dimensions | 330 x 140 x 260 mm |
| Net weight | 2.3 kg |
What's in the box
- 1 x DCC018N inflator (body only)
- 1 x 12V car power adapter
- 1 x high-pressure adapter
- 1 x Presta bicycle adapter
- 1 x ball needle
Frequently asked questions
Does the DeWalt DCC018N-XJ come with a battery?
No. The DCC018N-XJ is supplied body only. It works with any DeWalt 18V XR battery, sold separately, and can also run from the included 12V car adapter.
What is the maximum pressure of the DeWalt DCC018?
11 bar, which is 160 PSI, enough for car, van, motorcycle and bicycle tyres.
How long does it take to inflate a car tyre?
About 400 seconds for a 235/70R17 tyre from flat. Topping up a tyre by a few PSI takes well under a minute.
Can it inflate air beds and paddling pools?
Yes. A separate high-volume hose and adapter handle large low-pressure items, and the same hose deflates them.
Can I run it from mains power?
Yes, with the 240V AC adapter, ordered separately as spare part N557515. It is not included.
British Pounds


