Makita DMP181Z 18V LXT Cordless Inflator 161 psi (11.1 bar) – Body Only
The Makita DMP181Z is a cordless 18V LXT inflator for car tyres, bicycle tyres, sports balls and leisure inflatables. It is based on Makita’s DMP180 but has a higher maximum pressure of 11.1 bar (161 psi), so it also suits high-pressure tyres such as road bike tyres. It delivers up to 22 L/min at lower pressures for quick top-ups and fills.
You set the target pressure on the backlit digital gauge, and the inflator stops automatically when it gets there. This lets you inflate hands-free with less risk of over-filling. The DMP181Z remembers your last pressure setting after you switch it off, which saves time on jobs you repeat. If you overshoot, you can hold the air release button to let pressure out.
There are three inflation modes: High Speed, Low Speed and Ball. A built-in LED job light helps when you’re working in poor light or at the roadside. Valve adapters are supplied and store on the tool, so they’re less likely to go missing. The DMP181Z runs on any Makita 18V LXT battery. That makes it a practical addition if you already own LXT tools, whether you’re a mechanic, a cyclist or keeping it in the van.
Key Features
- 11.1 bar (161 psi) maximum pressure: handles everything from road bike tyres to car tyres and sports balls.
- Auto-stop at preset pressure: inflates to your target without you watching the gauge.
- Backlit digital pressure gauge: clear readings in daylight or low light.
- Pressure memory: recalls your last setting when you switch it back on.
- 3 inflation modes (High Speed, Low Speed, Ball): match the airflow to the job.
- Air release button: corrects over-inflation quickly.
- LED job light: helps with roadside and night-time use.
- Battery protection circuit: guards against overloading, over-discharging and overheating.
Technical Specifications
| Specification | Value |
|---|---|
| Model | DMP181Z (body only) |
| Battery platform | Makita 18V LXT Li-ion |
| Maximum pressure | 11.1 bar / 161 psi / 1,110 kPa |
| Air discharge at 200 kPa (29 psi) | 22 L/min |
| Air discharge at 700 kPa (100 psi) | 11 L/min |
| Air discharge at max pressure (161 psi) | 7 L/min |
| Duty cycle | 10 minutes on / 5 minutes off |
| Hose length | 650 mm |
| Inflation modes | 3 (High Speed, Low Speed, Ball) |
| Weight (body only) | 2.1 kg |
| Weight with battery | 2.5 – 2.8 kg |
| Dimensions (L x W x H, with 6.0Ah battery) | 316 x 108 x 231 mm |
| Sound pressure level (LpA) | 73 dB(A), K = 3 dB(A) |
| Vibration (3 axes) | 3.6 m/s², K = 1.5 m/s² |
What’s Included
- 1 x Makita DMP181Z 18V LXT Inflator (body only)
- Valve adapters: British, French, swim ring and ball
- Batteries and charger are not included
British Pounds


